What should be paid attention to when adjusting the rocker cutting machine?

With the development of industry, the function of cutting machine plays an indispensable power in industrial production, there are many kinds of it. In fact, each kind of equipment should be paid attention to when using. Today, we should pay attention to the matters needing attention when adjusting the rocker cutting machine

1. After the setting of the cutting die is completed, the material cut by the rocker cutting machine is placed on the rubber plate, then the knife die is placed on the material, then the feeding plate is pushed into the cutting area.

2. Press the cutting switch of the rocker cutting machine with both hands at the same time. At this time, the cutting pressure plate will drop press on the cutter mold, it will automatically rise to the position before starting after the cutting material of the cutter die.

3. When blanking the material, if it is found that the material is completely cut, adjust the cutting depth controller of the rocker cutting machine rotate the "pressure system" clockwise. If the knife mold is pressed too deep into the rubber plate, just rotate the "pressure system" in the counter clockwise direction. The longer the adjustment time is, the deeper the cutting depth is. Try to adjust until the knife die is slightly pressed into the rubber plate.

4. Pull the feeding plate of the rocker cutting machine out of the cutting area, take out the cut materials, complete a blanking process.

Is it troublesome? In fact, the operation of the equipment is very important. If you don't pay attention to it, it may cause certain harm to us, will also bring certain impact on production.